Belkin F5D5010 - Manual (Page 24)

Creating a Simple Network
21
5. If Client for Microsoft Networks does not appear in the Network
Configuration screen, highlight Client on the list and once again press
the Add button and the following screen will appear:
6. Select Microsoft as the Manufacturer, and Client for Microsoft
Networks, and press OK.
7. After a few seconds
the network
configuration window
will open again, press
the Add button and
add protocol if TCP/IP-
32-Bit PCI Fast
Ethernet Adapter is
not present, this time
select Microsoft as
the Manufacturer,
and TCP/IP and
press OK.
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 21