Emerson Radio Barbie BLOSSOM PHONE BAR550 - Manual (Page 17)

16
OPERATION (CONTINUED)
When a caller has recorded a message on
a personal message service, “ ” will
appear in the display and will go out when
you retrieve your message.
This feature is only for subscribers of a
voice mail message waiting service
through the local phone company.
1
MESSAGE WAITING FUNCTION
To view the new calls (NEW CALL indica-
tor will be lit), press the † 1 or π 2 but-
ton. As they are checked, the CALL # will
decrease.
When all new calls have been checked,
“END OF NEW CALL” will appear in the
display. Press the † button 1 to view the
oldest calls or the π button 2 to view the
most recent calls.
1
2
1
VIEWING THE CALLER ID
MEMORY
Press the MEMO button 1 and then press
one of the Key buttons (0-9) 2, correspon-
ding to the memory location you want to
dial. The stored number will be dialed
automatically.
1
2
2
Lift the handset and listen for a dial tone.
1
2
1
TO REDIAL A STORED NUMBER
NOTES:
• After all calls are viewed, “END OF LIST” will appear in the display.
• The NEW CALL indicator will blink until all new Caller ID information has been reviewed.
• The RPT icon will appear in the display if you have received multiple new calls from the
same number.
• If you receive a call from a number previously viewed in the Caller ID memory, the data in
memory will be replaced with the new call’s time and date, and the NEW icon will light in
the display.
• If no button is pressed within 20 seconds, the display will revert to normal display and
show the total call counter, new call counter, current time and date.