Blaupunkt 7 645 190 310 - Manual (Page 17)

44
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮ press the 4 RPT button ; again.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol is displayed.
Pausing playback (PAUSE)
➮ Press button 3 ; .
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 ; whilst pause
is activated.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
● Track number and clock time
● Track number and playing time
➮ Press the MENU button
7
.
➮ Press the or button
8
repeat-
edly until “CD DISP” appears in the
display.
➮ Press the or button 8 to
switch between “PLAY TIME” and
“CLOCK”.
➮ Press the MENU button
7
twice.
Random track play (MIX)
➮ Press the 5 MIX button ; .
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Cancelling MIX
➮ Press the 5 MIX button
;
again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮ Press and hold down the MENU
button
7 for longer than two sec-
onds.
The next track will then be scanned.
Note:
● You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Cancelling SCAN and continuing
listening to a track
➮ To cancel scanning, press the
MENU button
7
.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮ press the 4 RPT button
;
.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol lights up. The
CD MODE
02Calg/SanDiegoMP35_gb• 09.02.2005, 13:50 Uhr 44