Blaupunkt DX-V - Manual (Page 65)

Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun-
65
Selecting the clock display
You have the option of switching the clock display on/off in the bottom line of the
monitor.
1. Select the “Display time” menu item. Press the OK button.
The clock display is switched on if a small tick mark appears alongside the
menu item.
✔
Setting the standby time
You can select the amount of time that the TravelPilot DX-V will remain active after
you have switched off the ignition. The standby times available are 0, 15, 30 and 45
minutes.
1. Select “Standby time”. Press OK .
A menu for the selection of the standby time will appear. ✔
2. Select the desired standby time. Press OK .
The standby time selected will appear next to the menu item. ✔
Displaying the system version
1. To display the system version, select “Version”. Press OK .
The current system versions will appear. ✔
2. Press to exit the menu.
Entering your current vehicle position manually
1. If you would like to enter your current vehicle position manually, select “Enter
location”. Press
OK .
A selection menu will appear. ✔
2. Select the entry mode via town or map. Press OK .
Plus Point: The entry is made in the same way as described for entering a
destination.
System settings