BT Digital Baby Monitor Plus - Manual (Page 14)

BT Digital Baby Monitor Plus – Edition 4 – 26.02.04 – 5740
Power lights do not come on
■ If using the mains power adapters make sure they are
plugged in and switched on.
■ If using batteries, check they are correctly installed and
not discharged.
Link light does not come on
■ Check that both the Baby and Parent Units are switched
on, see page 8.
■ If using batteries check that they are correctly installed
and that they are not discharged.
Link light is flashing green
■ If you have pressed to use the Talk back feature,
the link light will flash to indicate one-way
communication between the units.
■ The Units are searching for a communication link.
Check they are within range of one another and that the
mains power (or batteries) are properly connected.
Link light is red and Not linked is displayed
■ The link between your Units is broken. You will also hear
an alert to let you know there is no communication
between the Units. If this happens, check that the mains
power (or batteries) is correctly connected and that the
Units are within range of one another.
Parent Unit remains silent or very quiet
■ The sensitivity setting may be too low, see page 11.
■ You may have set the volume too low, see page 8.
You can hear a high pitched noise
■ The Units are too close to each other, or the volume
setting is too high, see page 8.
Talk back feature is not working
■ Check that the volume is loud enough at the Baby Unit,
see page 8.
Helpline
If you have any problems using
your BT Digital Baby Monitor Plus,
call 08702 40 47 45 or email
[email protected].
Helpline open 9.00am – 5.30pm,
Monday to Friday and
9.00am – 2.00pm on Saturday.
Help
14