Bryston B100-DA - Manual (Page 9)

B100 dUAL CHANNEL POWER AMPLIFIER
POWER AMPLIFIER SECTION:
Power Output:
100 watts per channel into 8Ω
180 watts per channel into 4Ω
Input Impedance: 50K ohms single ended
Sensitivity: 1v = 100 Watts into 8 ohms
Distortion: tHd+noise: < 0.005% 20Hz to 20kHz at 100 watts
into 8 ohms,
IMD: < 0.010% 60Hz + 7KHz mixed 4:1
Noise: >108dB below rated output (with 20Hz to 22KHz
bandpass filter)
Slew Rate: >60 volts per microsecond
Power Bandwidth: <1 Hz to over 100 kHz
Damping Factor: Over 500 at 20 Hz, ref. 8 ohms
Power consumption: idle 30va, maximum power 600va
Heat load: idle 100 btu/hr., max power 288 btu/hr
PREAMPLIFIER SECTION:
Frequency response: 20Hz to 20KHz, ±.05dB
IMD or THD: <.007%
High Level Sensitivity: 500mv
Noise: 100dB @ 20Hz to 20KHz
(ref: 1v input)
GENERAL:
Dimensions:
17” or 19” wide X 4.55” high X 14” deep
(433 or 483mm X 116mm X 353mm)
Weight: approx. 30 lbs (13.6kg.)
B100 SPECIFICATIONS:
6