Philips Matchline Flat TV - Manual (Page 83)

3
1 2
MODE
MUTE
RADIO
VCR
DVD
SMART SMART ACTIVE
CONTROL
MENU
PC TV
OK
P
5 6 4
8 7 9
0
· ¢ К
∆
Ж
∫
щ ¤ У `
Ÿ ı
Е
Л Б
∏
3
- -
+ +
.
ª -
[ ”
Y
ª
Remote control keys
Select peripherals (p.14)
Press several times to select the
required EXT connector.
Teletext keys (p. 11)
or VCR / DVD (p.13)
œ PIP on/off (p. 8)
π Move PIP (p. 8)
Sleeptimer
To select the length of time before
the set automatically switches to
standby (from 0 to 240 minutes)
Active control
Optimizes the quality of the picture
according to the quality of reception.
Sound mode
Used to force programmes in STEREO
and NICAM STEREO to MONO or,
for bilingual programmes, to choose
between DUAL I or DUAL II .
When the sound mode is switched to
MONO, the indication is displayed in red.
Menu
To call up or exit the menus.
Cursor
These 4 keys are used to move
around the menus.
Volume
To adjust the sound level
PC / TV / Radio
Press one of these keys to switch
the television between PC,TV or
radio mode (p. 8).
16:9 formats (p. 12)
Mute
To mute or restore the sound.
Screen information
To display / remove the programme
number, the name (if it exists), the
time, the sound mode and the time
remaining on the timer. Hold down
for 5 seconds to permanently
display the programme number on
the screen.The volume level and the
smart control adjustments are then
displayed each time they are used.
Standby
To set the TV to standby mode.To
switch the TV set on again, press
b , P @ # or 0 9 .
List of programmes
To display/clear the list of programmes.
Use the keys
îÏ to select a
programme and the key ¬ to display it.
The symbol + is displayed alongside
all programmes which are locked (p.10)
or
? if they are not locked.
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The PERSONAL position relates to
settings selected from the menus.
Surround sound
To activate/deactivate the surround
sound effect. In stereo, this gives the
impression that the speakers are further
apart. For models equipped with Virtual
Dolby Surround*, you can obtain Dolby
Surround Pro Logic sound quality. In
mono, a stereo spatial effect is simulated.
* Manufactured under license from Dolby
Laboratories Licensing Corporation. ”Dolby” ”Pro Logic”
and the double-D symbol
£
are trademarks of
Dolby Laboratories Licensing Corporation.
Selecting TV programmes
To move up or down a programme.
The number, (the name) and the sound
mode are displayed for a few seconds.
For some TV programmes the title of
the programme appears at the bottom
of the screen.
Previous programme
To access the previously viewed
programme.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2
nd digit must be entered
before the dash disappears.
Mode selector (p. 13)
To activate the remote control in
TV,VCR (video recorder) or DVD
mode.