Brother DCP8020 - Manual (Page 188)

11 - 1 USING YOUR DCP WITH A MACINTOSH ®
11
mb
Setting up your USB-equipped Apple
®
Macintosh
®
The features supported by the DCP will depend on the operating
system you are using. The chart below shows which features are
supported.
*1 For Mac OS X 10.2 users, please upgrade to Mac OS X 10.2.1 or
greater. (For the latest information for Mac OS X, please visit at:
http://solutions.brother.com)
Using your DCP with a
Macintosh
®
Before you can connect the DCP to your Macintosh
®
, you must
buy a USB cable that is not longer than 1.8 metres.
Do not connect the DCP to a USB port on a key board or a
non-powered USB hub.
Feature Mac OS Mac OS X
8.6 9.X 10.1 10.2.1 or
greater * 1
Printing Yes Yes Yes Yes
Scanning (TWAIN) Yes Yes No Yes