Press and hold down the – BT Diverse 2000 User Manual
Page 33
31
At the base station:
•
Press and hold down the
GREY
paging button until you hear the
beeps (after about 10 seconds).
At the handset:
• Press and hold down the
2
button
(or
3
or
4
), to allocate a number to the
new base station.
• At the same time, hold down the
PWR
button until the display shows
:
• Enter the system code
(standard setting
0000.)
• Press the
#
button. The beeps stop
after a few seconds, and the display
shows all available handset numbers.
• Enter the single digit handset number
– from
2
to
6
– for the Additional
Handset. It is now registered.
If six handsets are already registered
with the base, three dashes will
appear in the display after you enter
the system code.
2-4
PWR
#
2-6
#
You now have up to 1 minute to register
the handset, during which the beeps
will continue.