Philips SHAVER Series 3000 afeitadora eléctrica en seco User Manual

Page 8

Advertising
background image

Cleaning the shaving unit under the tap

1

Switch off the shaver and disconnect it from the mains.

2

Press the release button to open the shaving unit.

3

Rinse the shaving unit and hair chamber under a hot tap for

30 seconds.

Be careful with hot water. Always check if the water is not too hot, to

prevent your hands from getting burnt.

- Rinse the hair chamber and the inside of the shaving unit.

- Rinse the outside of the shaving unit.

4

Close the shaving unit and shake off excess water.

Be careful not to hit the shaving unit against anything while shaking off

excess water.
Never dry the shaving unit and the hair chamber with a towel or tissue,

as this may damage the shaving heads and the coupling spindles.

5

Open the shaving unit again and leave it open to let the shaver dry

completely.

Cleaning the shaving unit with the cleaning brush

1

Switch off the shaver and disconnect it from the mains.

2

Press the release button to open the shaving unit.

3

Pull the shaving unit off the shaver.

ENGLISH

8

Advertising