Philips Antena de televisión digital - Manual (Page 5)

6
Note
• To check the distance from the local TV
broadcast transmitters to your location, visit
www.antennaweb.org for more information.
Set up a digital tuner with this
antenna
You can install available channels with the digital
TV tuner. This automatic process is part of the
setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive
viewable channels.
There are two ways to connect the antenna to
the TV:
• Connect the antenna to a digital tuner.
If the signal strength is good enough, the
channels can be memorized in the tuner
automatically .
• Connect the antenna directly to the TV.
Tune to the analogue channels and find
the best antenna location. Then re-
connect the antenna to the digital tuner.
Ensure the signal strength is good enough
before you install the channels with the
tuner.
2
Connect the DC plug to the antenna
and the power supply to a 100-240V AC
outlet.
Note
• Ensure the antenna is placed on a flat surface.
4 Set up the
SDV5122P
For UHF reception
1
Turn the TV to the desired channel/
station.
2
Position the UHF antenna horizontally or
vertically.
EN
SDV5122P_12_UM_Book 1-2.indb 6 2011-7-13 17:28:47