Warning, Peration 7 – Bissell PowerSteamer 1370 series User Manual

Page 7

Advertising
background image

O

peration

7

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Fill the 2-in-1 water tank (continued)

3. Carry like a bucket to the sink. Rotate the

handle forward to unlatch the lid. Remove lid,

turn over and locate built in measuring cup.

4. Fill formula to the indicated fill line on the

built in measuring cup and pour into mouth

of the bladder.

If using BISSELL 3X Concentrate

formulas: add one formula capful directly

into the mouth of the bladder.

5. Fill up the bladder with clean hot tap water.

*Do not boil or microwave water as it

can destroy the bladder.

6. Replace the top of the tank by matching

the lid and tank edges. Handle must be in

the forward position in order to replace lid.

Rotate the handle to the carrying position to

latch the lid.

Note: Remember to secure the lid and test to make
sure it is secure before picking up the tank.

7. Place tank into machine base, seating firmly

in place. Rotate tank handle back into latched

position. Bring machine handle back into

upright position.

Carpet cleaning strokes

1. Plug the deep cleaner into a proper outlet

and turn the power switch ON

( I )

. The

switch is located on the back of the unit.

2. With your foot, press the handle release

lever on the back of the lower body of unit.

3. While pressing the spray trigger, make one

slow forward wet pass and another back.

Let the BISSELL advanced deep cleaning

formula and DirtLifter PowerBrush do the

work for you.

Caution: Do not over wet.

4. Release the spray trigger and make one

slow forward and backward pass over the

same area to remove any residual dirty

water and aid in drying.

5. Repeat cleaning passes until solution being

pulled up appears clean. Continue passes

without pressing the trigger until you can’t

see any more water being suctioned up.

3.

7.

Tip:

Thorough vacuuming

before deep cleaning will prevent
early clogging of the lint trap.

WARNING:

To reduce the risk of fire

and electric shock due to

internal component

damage, use only BISSELL

cleaning fluids intended for

use with the deep cleaner.

Non-BISSELL cleaning

solutions may harm the

machine and void

the warranty.

5.

6.

4.

ug120-4072_1370-1622_908.indd 7

10/14/08 12:55:16 PM

Advertising
This manual is related to the following products: