Philips Purificador de agua para grifo - Manual (Page 7)

performance. When you start using the water purifier again, let
the water run at the filtered setting for 1 minute before use. If the
filter cartridge emits an unpleasant smell, replace it with a new one.
Water temperature
Do not let water hotter than 65°C run through the water purifier at
the unfiltered setting or hotter than 50°C at the filtered setting.
This may damage the appliance.
Do not let the water purifier freeze.
applications
Only use the appliance to filter water that meets drinking water
standards.
Do not block the filtered water outlet or connect other devices to it.
If the water pressure is very high, reduce the water flow of the tap to
prevent damage to the cartridge.
Keep the water purifier away from heat to avoid distortion or
breakage.
Do not tamper with the water purifier.
This appliance does not soften water.
Do not use filtered water in aquariums. Tap water, filtered or
unfiltered, can be harmful to fish.
We advise you to boil the filtered water before you drink it.
Features
The water purifier removes chlorine, unpleasant smells and tastes, as
well as large sediments from your tap water.
The silver-coated activated carbon prevents bacteria growth inside
the filter.
The replacement reminder sticker helps you remember when to
replace the filter cartridge.
The 2ltrs/min high-speed initial flow rate gives you plenty of clean
water instantly.
The water selection lever offers you a choice of three water flow
types: unfiltered spray, unfiltered stream or filtered spray.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
English 
4222.002.6611.2.indd 7 06-09-2006 14:34:25