Buffalo Technology Buffalo AirStation MIMO240 Wireless Cable/DSL Router WZR-G240 - Manual (Page 8)

8
1. Power down the Cable or DSL modem and the
computer which will be used to confi gure the
AirStation router.
2. Plug the Cable or DSL’s LAN Ethernet cable into the
AirStation’s WAN port. Initially, you may need to
unplug this cable from your computer, hub or other
router.
3. Plug the provided Ethernet cable into a LAN port
on the AirStation and plug the other end into your
computer’s Ethernet adapter (NIC). If you plan
to initially confi gure the AirStation wirelessly (not
recommended), you may skip this step.
4. Power on your cable or DSL modem and wait one full
minute, then power on the AirStation router and wait
one full minute, and fi nally, power on the computer
which will be used to confi gure the AirStation.
Connecting your AirStation
Power
WAN Port
LAN Ports