Philips Pure Essentials Collection Batidora de mano - Manual (Page 8)

3 Immerse the blade guard completely in the ingredients to avoid splashing (Fig. 3).
4 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4).
- When you use the normal speed button, you can adjust the speed with the speed selector. The
higher the speed, the shorter the processing time required. To select a different speed setting,
turn the speed selector to the preferred setting before or while you press the normal speed
button (Fig. 5).
- When you use the turbo speed button, the appliance operates at maximum speed. In this case,
you cannot adjust the speed with the speed selector.
5 Blend the ingredients by moving the appliance slowly up and down and in circles (Fig. 6).
Food processor
Blade unit
The blade unit is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled
eggs, garlic, herbs, dry bread etc.
The blades are very sharp! Be very careful when you handle the blade unit, especially when you
remove it from the bowl, when you empty the bowl and during cleaning.
1 Place the tool holder in the bowl (Fig. 7).
2 Remove the protective cover from the blade unit.
3 Put the blade unit on the tool holder (Fig. 8).
4 Put the ingredients in the bowl.
See the table below for the recommended quantities and processing times.
chopping quantities, processing times and speed settings
Ingredients Quantity Time Speed
Parsley 100g 30sec. 5
Onions & eggs 500g 7 x 1sec.(pulse) 1
Meat 300g 30sec. Turbo
Parmesan 300g ~ 60sec. Turbo
Nuts 500g ~ 30sec. Turbo
Dark chocolate 200g ~ 45-60sec. Turbo
5 Put the lid on the bowl (1). Turn the lid anticlockwise (2) to fix it (‘click’) (Fig. 9).
6 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 10).
7 Put the pusher in the feeding tube.
Note: The pusher prevents spillage.
8 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4).
Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and
loosen the ingredients with a spatula or add some liquid.
Note: Always let the appliance cool down after chopping meat with the blade unit.
9 After processing, release the normal or the turbo speed button to switch off the appliance
and wait until the blade unit has stopped rotating.
EnglisH 8