Philips BEARDTRIMMER Series 3000 barbero para barba y barba de 2 días - Manual (Page 12)

removing the rechargeable batteries
Only remove the rechargeable batteries if they are
completely empty.
1 Disconnect the appliance from the mains and
let the appliance run until the motor stops.
2 Insert a screwdriver in the hair chamber to
separate the housing part.
3 Cut the wires close to the batteries with a pair
of household scissors.
4 Remove the printed circuit board with the
rechargeable batteries.
5 Cut the battery tabs with a pair of scissors and
separate the batteries from the printed circuit
board.
Do not connect the appliance to the mains again
after you have opened it.
guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com/support or contact the Philips
Consumer Care Centre in your country. You find its
phone number in the worldwide guarantee leaflet. If
there is no Consumer Care Centre in your country,
go to your local Philips dealer.
English 12