Badger Basket 09960 - Manual (Page 3)

1.0/0508/HF
STEP 1: Unfold the stroller.
STEP 2: Insert the short axle through the front wheel, and add one SPACER (B) and one frame cap
to each side.
STEPS 3 & 4: Attach the front wheel to the stroller frame by sliding it onto the front posts and pushing
down on the plastic rings to secure the wheel in place.
STEP 5: Insert the long axle through the rear posts of the stroller frame. Add one SPACER (A) to
each end of the axle; then snap the wheels on (squeeze the latch open, slide the wheel onto the axle,
and release the latch). Gently tug the wheels to ensure they are snapped on properly.
STEP 6: Adjust the height of the handle by pressing the buttons on either side.
STEP 7: Lock the safety latches.
STEP 8: Fold the stroller by releasing the safety latch and pulling up on the two frame buckles located
on both sides of the stroller seat.
1.
2.
3.
4.
5.
6.
7.
8.
Page 3 of 3