Bosch DVR1EP32A User Manual

Page 16

Advertising
background image

16

4.4

Configuring Scheduled Recordings

Main Menu

➝ Timer Settings

This menu allows the scheduling of a timed-recorded event. A sample menu is shown here.

The fields to be programmed in the above menu are as follows:

• Day: The date or day(s) on which the recording will occur. Choose from the following:

1 through 31 (any period of calendar days named)
Monday–Sunday (any individual day)
Monday–Friday (weekdays)
Saturday–Sunday (weekends)
Monday through Sunday (all week long)

•

Start: Hours/Minutes of the starting time for the scheduled recording (24-hour clock time). Note that hours and
minutes are edited separately.

•

Stop: Hours/Minutes of the ending time for the scheduled recording (24-hour clock time). Note that hours and
minutes are edited separately.

•

Spd (pps): Capture rate for the scheduled, normal recording in pictures per second. Choose from the following:

60, 30, 20, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0*

*NOTE: 0.0 corresponds to Alarm Only recording.

• Quality: Choose from either SVHS (highest picture quality) or VHS (standard picture quality, with a longer

recording time).

• On/Off: Choose from one of three parameters:

On (recording starts as scheduled)
Off (recording does not start)
Delete (all recording schedule parameters are deleted)

NOTE

: The fields in the Timer Settings menu can be edited easily using the Left/Right Arrows to move between

fields and Up/Down Arrows to scroll through the various options at each parameter. When you finish setting the
parameters, press ENTER. Use the Left/Right Arrows to navigate, then highlight [OK], and press ENTER.

4.5

Configuring the Recording Parameters

Main Menu

➝ Record Settings

This menu allows you to set the recording speed and quality for both normal and
alarm conditions. Use this menu to specify the following:
• Record input (composite video or S-video) on the DVR1 rear panel.
• Record speed (in pictures per second) for normal recording.
• Record speed (in pictures per second) for an alarm condition.
• Video quality (i.e. compression ratio/image quality) for recorded images (SVHS or

VHS). Note that higher compression (VHS) corresponds to standard quality images,
with a longer recording time.

NOTE

: If a single camera input is connected to the unit, select NONE. See Section 5.8 for details on Multiplexer

applications.

DAY

START

STOP

SPD (pps)

QUALITY

ON/OFF

31

16:45

17:05

20

VHS

ON

SAT

7:55

8:10

10

SVHS

OFF

MON-FRI

9:56

11:05

60

VHS

ON

SAT-SUN

14:23

14:50

60

SVHS

ON

MON-SUN

2:23

3:34

20

VHS

OFF

--

--:--

--:--

--

--

--

[OK]

EDIT MODE HIT "ENTER" TO TOGGLE EDIT MODE

RECORD INPUT

NORMAL RECORD SPEED

ALARM RECORD SPEED

VIDEO QUALITY

Advertising
This manual is related to the following products: