Gateway E-9220T - Manual (Page 25)

20 www.gateway.com
Chapter 3: Maintaining Your Server
3
Select the password to set according to the following table.
4
Type the password and press E NTER , then type it again and press E NTER .
5
Save your changes and exit the BIOS Setup utility.
Option Description
Supervisor password To control access to system configuration, set a supervisor password.
Using a supervisor password lets you make changes to any setting
in the BIOS.
Passwords can be cleared. To clear the passwords, see “Resetting
BIOS passwords” on page 69 .
User password The supervisor password must be set up before a user password can
be set. To control access to the server, set a user password. The
supervisor can set the level of access granted to the user password.
The user password access levels are:
■ No Access. User cannot access the BIOS Setup utility.
■ Limited. User can change only the date and time.
■ View Only. User can see all settings, but cannot change them.
■ Full. User can change every setting except the supervisor password.
Passwords can be cleared. To clear the passwords, see “Resetting
BIOS passwords” on page 69 .