Attaching the brush head, Charging – Philips Sonicare CleanCare Cepillo dental sónico recargable User Manual

Page 7

Advertising
background image

preparing for use

1

To store excess cord, wind it round the cord

storage hooks in the bottom of the charger.

attaching the brush head

1

To place the brush head on the handle, slide

the ribs on the inside of the nut into the

grooves in the top of the handle.

2

Screw the brush head nut clockwise until it

is firmly tightened. If the brush head rattles

during use, tighten the nut further.

3

Remove the travel cap from the brush head

before you start brushing.

Charging

Charge the Sonicare for at least 24 hours during the

first few days of use.

We advise you to keep the Sonicare in the plugged-

in charger when not in use, to maintain a full battery

charge.

When the battery is empty, it takes at least 24 hours

to charge the Sonicare fully.

1

Place the handle in the charger (with the on/off

button facing towards the front of the charger)

to charge the appliance.

EnglisH

7

Advertising