Philips HAIRCLIPPER Series 1000 Cortapelos - Manual (Page 6)

Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗ Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
◗ If the cord or adapter is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗ The adapter contains a transformer. Do not cut off the adapter to
replace it with another plug, as this will cause a hazardous
situation.
◗ The adapter transforms 220-240 volts to a safe voltage lower
than 24 volts.
◗ Keep the appliance and the adapter dry.
◗ Keep the appliance out of the reach of children.
◗ Store and use the appliance at a temperature between 5cC and
35cC.
◗ Do not use the appliance if the cutting unit or comb attachment
is damaged or broken, as this may cause injury.
◗ This appliance is only intended for clipping human scalp hair. Do
not use it for any other purpose.
Preparing for use
Clipping with comb attachment:
1 Slide the arms of the comb attachment into the guiding grooves
of the appliance.
2 Press the adjustment button on the back of the appliance and
slide the comb attachment to the desired position (see table).
3 Release the adjustment button to lock the comb.
4 Insert the mains plug into the wall socket.
5 Switch the appliance on.
ENGLISH 6
4203 000 33681 02-02-2006 13:42 Pagina 6