Philips Satinelle Ice Depiladora - Manual (Page 12)

cleaning the shaving head (HP6496 only)
Clean the shaving head after every use.
1 Make sure the appliance is switched off and unplugged.
 Pull the shaving unit out of the shaving head. (Fig. 18)
 Brush the hairs off the shaving unit and the shaving head. Make sure
that you also brush away any hairs that have collected under the
trimmers. (Fig. 19)
 You can also rinse the shaving unit (not the appliance!) under the
tap. (Fig. 0)
5 Put the shaving unit back into the shaving head and snap the shaving
head back onto the appliance (‘click’). (Fig. 1)
Do not exert pressure on the shaving foil to avoid damage.
6 Rub a drop of sewing machine oil onto the trimmers and shaving
foil of the shaving unit twice a year.
storage
1 Put the protective cap on the shaving head (‘click’). (Fig. 22)
 Store the appliance and the accessories in the pouch.
replacement (HP6496 only)
If you use the shaving head several times a week, replace the shaving unit
(type HP6193) after one or two years of use or if these parts are
damaged.
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
(Fig. )
,
EnglisH 1