Bose Wave Music System - Manual (Page 25)

23
Personalizing Your Wave ® Music System
Setting the room code
Your Wave ® music system comes from the factory ready to operate as a second room (room
code B) when connected to a Bose ® link enabled Lifestyle ® system. If you want to use your
Wave ® music system with your Lifestyle ® system beyond a second room you will need to
change the room code to match that of the remote control you are using for that room.
Refer to your Lifestyle ® system owner’s guide for more information on room codes.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
2. Press Tune/MP3 > six times until ROOM- B is displayed. The dashes following
the room letter indicate how the microswitches should be set on the Lifestyle ® remote
control.
3. Press Time – or Time + to select a room code other than room B.
4. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the setup menu
to end automatically.
Performing a system reset
If you wish, you can restore your Wave ® music system to the original factory settings.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
2. Press Tune/MP3 > seven times until RESET ALL- NO is displayed.
3. Press Time – or Time + to change RESET ALL- NO to RESET ALL- YES.
4. When PRESS 2 TO CONFIRM appears on the display, press Presets button 2. When
the reset is complete, DEFAULTS RESET is displayed.
5. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the setup menu
to end automatically.
Time
Alarm
Time
Menu
Alarm
Time
Menu
Tune/MP3
Time
Alarm
Time
Menu
Alarm
Time
Menu
Tune/MP3