Belkin F8GFPC200 User Manual
Page 4
2
n52te
Table of Contents
seCTions
1
2
3
4
5
6
7
8
GeTTInG sTarTed
Installation Verification
1. To check if installation was successful, right-click on “My Computer”
and left-click on “Properties”. Then left-click on “Hardware” and then
on the “Device Manager” button.
2. Check to make sure that the Device Manager list includes:
a. A new entry under Human Interface Devices, “n52te”.
b. A new entry under Human Interface Devices, “Virtual HID Device”.
driver Installation
1. Insert the n52te Installation CD into your PC’s CD/DVD drive.
2. Driver installation will begin shortly. If it does not, click the
“Start” button and choose “Run”. Click “Browse” and choose
your CD drive. Select “setup.exe” and click “OK”.
3. Follow the on-screen instructions to continue with the driver
installation.
4. After the installation is complete, click “Finish” and reboot
when prompted.
5. After your PC boots up, connect the n52te to an available USB
port on your computer.
6. Please allow Windows to detect and fully initialize the n52te.
Do not disconnect or reboot/shut down your system during
this process.
7. Once driver initialization has finished, please reboot your
system when prompted to do so by the installer.