BOXLIGHT CP-15t - Manual (Page 35)

35
MCI MODE
PICTURE IMAGE ADJUSTMENT
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select IMAGE
and
press the SELECT button. Another dialog box PICTURE IMAGE
ADJUSTMENT Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to
▲ or ▼ of the item that you want to change by
pressing the POINT UP/DOWN buttons. To increase the value,
point the arrow to
▲ and then press the SELECT button. To
decrease the value, point the arrow to ▼ and then press the
SELECT button.
1
2
Adjust Picture Image Manually
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 127.) This item can be adjusted by pressing the FINE
SYNC. button on the Top Control or the Remote Control Unit.
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
Contrast
Point to ▼ to make the image lighter, and select ▲ to make the image
darker. (From 0 to 63.)
Brightness
Point to ▼ to darken the image, and select ▲ to brighten the image.
(From 0 to 63.)
It closes the PICTURE
IMAGE ADJUSTMENT
Menu.
Move the arrow to
▲ or ▼ and press
the SELECT
button.
It indicates roughly
the level of the
item.
Recalls the data previously adjusted. Reset
Stores the adjusted data in the memory. Stored
Closes the PICTURE IMAGE ADJUSTMENT Menu. Quit
White Balance (Red / Green / Blue)
Point to ▼ to lighten the color of image, and select ▲ to darken the the
color of the image deeper. (From 0 to 63.)
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Top Control or on the Remote Control Units). The "Normal" display
will be displayed on the screen for a few seconds.
Normal Function
Normal
Each of the keys operates as follow.