Bissell 20Q9 - Manual (Page 7)

Your BISSELL CleanView II is not only a pow-
erful carpet and rug vacuum cleaner, it’s also a
versatile above floor vacuum cleaner when you
select one of the special tools.
Raise Handle to Upright Position.
Grasp the Quick Reach Handle and lift Hose Wand to
separate from suction intake opening.
Attach tools by firmly pushing onto Vacuum Hose or
Extension Wand.
Combination Dusting Brush/Upholstery Tool:
Two types of cleaning tools are included in one attach-
ment: rotate for desired tool.
■ Use Brush side to dust furniture, blinds, books,
lamps, shelves, and baseboards.
■ Use Upholstery side for curtains, draperies, cushions,
fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
TurboBrush ® (Select Models):
Use rotating brush action for small areas such as
stairs and upholstery.
note: Press gently when using TurboBrush to
gain maximum cleaning. Too much pressure
could cause the brush to stop rotating.
When you are done using your vacuum,
return it to the Upright position and store
the Power Cord.
Turn vacuum cleaner off.
Unplug Power Cord by grasping the polarized plug
(NOT the cord) and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of
vacuum cleaner.
Clip molded plug to Power Cord to secure.
7
Special On-Board Tools
1.
2.
3.
Tip:
Hair, string and small
objects can block the
Vacuum Hose or Tools.
Check them occasion-
ally for obstructions.
CAUTIOn:
The Rotating Floor Brush continues to
rotate while tools are in use. To reduce
the risk of injury from moving parts,
always move the cleaner with the
Carrying Handle at the back of
the cleaner. Always place vacuum
cleaner on floor with Handle in Upright
position when using tools. never place
your fingers under the cleaner when it
is running. never place Powerfoot on
furniture or uneven surfaces. Do not
place vacuum cleaner close enough to
objects to pull them into rotating brush.
7
nOTICE:
The Floor Brush will continue
to rotate while you use your
vacuum for above floor cleaning.
To prevent carpet damage, do
not lean on the vacuum or let the
Powerfoot tilt forward.
nOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges. The
discharges are entirely harmless and
are not associated in any way with
the main power supply.
1.
Power Cord Storage
2.
3.
4.
Select Models Only