BMW 2004 Mini Convertible Cooper - Manual (Page 71)

69
O
V
ER
VIEW
R
E
PAIRS
O
PER
A
TIO
N
CO
NTRO
LS
DATA
IN
D
E
X
DYNAMIC STABILITY CONTROL (DSC) *
The concept
This system optimizes driving stability and
traction, especially when just starting off,
when accelerating or when cornering. It
also maintains driving stability even in crit-
ical driving situations.
DSC recognizes unstable vehicle conditions,
such as understeering or oversteering, and,
as far as is possible within the laws of phys-
ics, helps keep the vehicle on a steady
course by reducing the rpms and by brake
applications to the individual wheels.
The DSC is operational every time you start
the engine. It contains the following func-
tions:
>All Season traction Control (ASC)
>Antilock Brake System (ABS)
>Cornering Brake Control (CBC)
>Electronic Brake Force Distribution (EBD).
The laws of physics cannot be
repealed, even with DSC. An appro-
priate driving style always remains the
responsibility of the driver. Avoid using the
additional safety margin provided by the
system as an excuse for taking unnecessary
risks.
Do not make any modifications to the DSC
system. Allow only authorized technicians
to perform service procedures on the
DSC.
<
Indicator lamp
The indicator lamp will go out
shortly after the ignition has been
switched on, refer to pages
17 , 18 .
If the indicator lamp flashes:
DSC controls the drive and braking forces.
The indicator lamp stays lit:
The system is defective or was turned off
using the button. Have the system checked
as soon as possible.
To switch off the DSC
Briefly press the switch.
The indicator lamp stays lit.
When driving with snow chains, it may be
effective to switch off the DSC for a brief
period.
To maintain stability, always drive
with the DSC switched on whenever
possible. <
To switch the DSC back on
Briefly press the switch once again.
Indicator lamp goes out.
Online Edition for Part-No. 01 41 0 158 427 - © 07/04 BMW AG