Blanco Precision User Manual
Page 3
5. Apply silicone caulking to inside edges of countertop sink outline all the way around. Use a
generous amount of silicone and leave no gaps or voids anywhere inside the opening.
6. Carefully drop the sink into the caulked area.
7. Apply gentle and even pressure to the frame. Work the sink downward until the top of the
frame is flush with the countertop.
8. Begin to tighten the “sink-installed” mounting extension clips at opposite ends and continue in
sequence around the sink using a screwdriver.
9. Remove excess silicone caulking with cloth or paper towel before it cures.
CAUTION: Excess silicone caulking may squeeze out between the countertop and the
sink. Please immediately wipe clean. Silicone caulking should fill all gaps in the joint to
create a seamless seal.
Please note that Blanco Precision™ MicroEdge™ sinks are so versatile that they can be installed as
"Inset" (Drop-in) or "Flushmounted" to your countertop, depending on your design choice.
3
BLANCO
1 12.08.2008
®