Brother DCP 8060 - Manual (Page 26)

Chapter 2
14
Loading paper and
other media
2
When printing on plain paper 16 to 28 lb (60
to 105 g/m
2
) or laser transparencies use the
paper tray.
For printing on other types of media use the
MP tray (Multi-purpose tray).
Loading paper
2
a
Unfold the output paper tray support
flap.
b
Pull the paper tray completely out of the
machine.
c
While pressing the blue paper-guide
release lever (1), slide the paper guides
to fit the paper size. Make sure that the
guides are firmly in the slots.
For legal size paper, press the lever (2)
located at the back of the tray and pull
out of the back of the open tray. Move
the tray lock button (3) to the lock
position.
d
Fan the stack of paper well to avoid
paper feeding problems.
e
Insert the paper into the paper tray with
the top edge of the paper first and the
print side down.
Make sure that the paper is flat in the
tray and below the maximum paper
mark (1).
f
Push the paper tray firmly back into the
machine.
(2)
(3)
(1)
(1)
(1)