Brother DCP 8060 - Manual (Page 39)

Making copies
27
5
Changing copy quality
5
You can select from a range of quality
settings. The default setting is Auto.
„
Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
„
Text
Suitable for documents containing only
text.
„
Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the steps below:
a
Load your document.
b
Use the dial pad to enter the number of
copies (up to 99).
c
(DCP-8060)
Press Quality.
(DCP-8065DN)
Press Contrast/Quality.
Press a or b to choose Quality.
Press OK.
d
Press d or c to choose Auto, Text or
Photo
.
Press OK.
e
Press Start.
To change the default setting, follow the
steps below:
a
Press Menu, 2, 1.
21.Quality
a Auto
Text
b Photo
Select ab & OK
b
Press a or b to choose the copy
quality. Press OK.
c
Press Stop/Exit.
Changing text copy
resolution
5
You can change the text copy resolution to
1200x600dpi
if you have selected Text
from the Quality or Contrast/Quality
options, and make a copy with 100% ratio
using the scanner glass. To change the text
copy resolution, follow the steps below:
a
Put your document on the scanner
glass.
b
Press Menu, 2, 2.
22.FB Txt Quality
a 1200x600dpi
b 600dpi
Select ab & OK
c
Press a or b to choose the text copy
resolution. Press OK.
d
Press Stop/Exit.