Brother DCP 8060 - Manual (Page 74)

62
Document jams
C
If the document is jammed, follow the steps
below.
Document is jammed in the top of the
ADF unit
C
The document may get jammed if it is not
inserted or fed properly, or if it is too long.
Follow the steps below to clear a document
jam.
a
Take out any paper from the ADF that is
not jammed.
b
Open the ADF cover.
c
Pull the jammed document out to the
left.
d
Close the ADF cover.
e
Press Stop/Exit.
Document is jammed under the
document cover
C
a
Take out any paper from the ADF that is
not jammed.
b
Lift the document cover.
c
Pull the jammed document out to the
right.
d
Close the document cover.
e
Press Stop/Exit.
Document is jammed at the output
tray
C
a
Take out any paper from the ADF that is
not jammed.
b
Pull the jammed document out to the
right.
c
Press Stop/Exit.