Brother DCP 8060 - Manual (Page 90)

78
CAUTION
Wait to unpack a new drum unit until
immediately before installing it. Put the old
drum unit into the plastic bag.
c
Unpack the new drum unit.
d
Put the toner cartridge firmly into the
new drum unit until you hear it lock into
place. If you put it in properly, the lock
lever will lift automatically.
e
Put the drum unit and toner cartridge
assembly back in the machine.
Do not close the front cover.
f
Press Clear/Back.
Replace Drum?
a 1.Yes
b 2.No
Select ab & OK
To confirm you are installing a new
drum, press 1.
g
When the LCD shows Accepted, close
the front cover.
CAUTION
If toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
Replacing periodic
maintenance parts
C
The periodic maintenance parts will need to
be replaced regularly to maintain the print
quality. The parts listed below will have to be
replaced after printing approximately 100,000
pages. Please call Brother Customer Service
when the following messages appear on the
LCD.
LCD message Description
Replace PF
KitMP
Replace paper feeding kit for
MP tray.
Replace PF
Kit1
Replace paper feeding kit for
Tray 1.
Replace PF
Kit2
Replace paper feeding kit for
Tray 2.
Replace Fuser
Replace fuser unit.
Replace Laser
Replace laser unit.