Brother PC-420 - Manual (Page 119)

Sewing the Various Built-In Decorative Patterns 113
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Sewing the Various Built-In Decorative Patterns
Satin stitches, cross-stitches and decorative satin stitches can be sewn. All are sewn with monogramming foot
“N”.
Sewing beautiful patterns
In order to sew the patterns correctly, the following
must be considered.
■ Fabric
Before sewing stretch or thin fabrics or fabrics
with a coarse weave, affix the optional stabilizer
material to the wrong side of the fabric or place a
thin sheet of paper, such as tracing paper, under
the fabric. Since material puckering or bunched
stitches may occur when satin stitches are sewn,
be sure to affix stabilizer material to the fabric.
■ Needles and threads
When sewing thin, mediumweight or stretch
fabrics, use the ball point needle. When sewing
thick fabrics, use a 90/14 home sewing machine
needle. In addition, 75/11 to 90/14 thread should
be used.
■ Trial sewing
Depending on the type and thickness of the fabric
being sewn and whether or not stabilizer material
is used, the desired result may not be achieved.
Be sure to sew a trial piece of fabric before sewing
your project. In addition, while sewing, be sure to
guide the fabric with your hands in order to
prevent the fabric from slipping.
Sewing patterns
1
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 37).
2
Select a stitch.
• For details, refer to steps
4
through
9
of
“Selecting stitching” (page 68).
3
Start sewing.
• The stitching is sewn in the direction
indicated by the arrow.