Brother PC-420 - Manual (Page 2)

Cover A
Enclosed Accessories
After opening the box, check that the following accessories are enclosed. If any item is missing or damaged,
contact your retailer.
Accessories
The following items should also be enclosed in the box.
1. 2. 3. 4. 5. 6. 7. 8. 9.
10. 11. 12. 13. 14. 15. 16.* 17. 18. 19.
20. 21. 22. 23. 24. 25. 26. 27.
28. 29.
* 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
30. 31. 32.
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A. Others U.S.A. Others
1 Buttonhole foot “A” XC2691-051 17 Twin needle X59296-051
2 Overcasting foot “G” XC3098-051 18 Cleaning brush X59476-051
3 Monogramming foot “N” X53840-351 19 Eyelet punch 135793-001
4 Zipper foot “I” X59370-051 20 Screwdriver (large) X55467-051
5 Zigzag foot “J” (on machine) XC3021-051 21 Screwdriver (small) X55468-051
6 Blind stitch foot “R” X56409-051 22 Spool cap (large) 130012-054
7 Button fitting foot “M” 130489-001 23 Spool cap (medium)(2) X55260-153
8 Walking foot SA140 XC2214-002 24 Spool cap (small) 130013-154
9 Quilting foot SA129 XC1948-002 25 Extra spool pin XC4654-051
10 Stitch guide foot “P” SA160 XA8839-002 26 Spool net XA5523-050
11 Adjustable zipper/piping foot SA161 XC1970-002 27 Foot controller XC1154-051
12 Non stick foot SA114 XC1949-002 28 Grid sheet set SA527 XC4549-051
13 Open toe foot SA147 XC1964-002 29 Knee lifter XA6941-052
14 Seam ripper X54243-001 30 Operation manual XE1139-001
15 Bobbin (4) SA156 XA5539-151 31 Quick reference guide XC4546-151,XC4589-051
16 Needle set X58358-051 32 Hard case XC2360-152
Note
(For U.S.A. only)
● Foot controller: Model N5V
This foot controller can be used on this
machine model NX-400/PC-420.
● The screw of the presser foot holder is
available through your authorized dealer
(Part code: XA4813-051).
● The organized accessory tray is
available,through your authorized
dealer.(Part code: XC4489-051)