Philips Afeitadora eléctrica - Manual (Page 13)

Extra-thorough cleaning method
1 Switch off the shaver, remove the adapter from the wall socket and
pull the appliance plug out of the shaver.
2 Open the shaving unit, turn the lock anticlockwise (1) and remove
the retaining frame (2) (Fig. 28).
3 Clean the cutters and guards with the brush supplied (Fig. 29).
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving performance is restored.
4 Put the shaving heads back into the shaving unit. Put the retaining
frame back into the shaving unit and turn the lock clockwise (Fig. 30).
5 Close the shaving unit.
cleaning the trimmer
Clean the trimmer every time you have used it.
1 Switch off the shaver, remove the adapter from the wall socket and
pull the appliance plug out of the shaver.
2 Clean the trimmer with the brush supplied (Fig. 31).
3 Lubricate the trimmer teeth with a drop of sewing machine oil
every six months (Fig. 32).
storage
There are two ways to store the shaver:
- put the protection cap on the shaver to prevent damage (Fig. 12).
- store the shaver in the Jet Clean system (Fig. 33).
replacement
For optimal shaving performance, we advise you to replace the shaving
heads every 2 years.
Replace damaged or worn shaving heads with HQ8 Philips Shaving
Heads only.
EnglisH 13