Philips TV - Manual (Page 3)

1
Installing your television set
Insert the aerial plug
into the
: socket at
the rear of the set.
Insert the mains plug
into a wall socket
(220-240 V / 50 Hz). Insert the two R6-
type batteries
(supplied) making sure
that they are the right
way round. To switch on the set, press
the on/off key. If the
television remains in
standby mode, press P
#
on the remote control.
ж В к ®
Quick installation
Program sort
When you turn on the TV set for the first
time, a menu is displayed on screen.This menu
prompts you to select the country:
If the menu is not displayed, press and hold down
the
”
- and
”
+ keys on the TV set for 5
seconds to display the menu.
& Use the Ȭ
keys on the remote control to
select your country and validate with
Ï
.
If your country does not appear in the list, select
choice “. . .”
é The search starts automatically.All the available
TV programmes will be stored. This operation
takes a few minutes.The display shows the
progress of the search and the number of
programs found. At the end of the search, the
menu disappears.
To exit or interrupt the search, press
H
.
If no programme is found, see Tips chapter at the
end of the instruction for use.
“ The programmes found are arranged by
number 99, 98, 97, …etc.You may now
renumber these programmes as you wish.
See Program sort below.
& Press key H
.The Main menu is displayed on
the screen.
é With the î
key, select Manual Store and
press
¬
.
“ Use the 09
or
@
P
#
keys to select the
program you wish to renumber.
‘ Then use the Ï
key to select Program No
and enter the new number with the
Ȭ
keys.
( With the
Ï
key, select Store and press
¬
.
§ Repeat steps “ to ( for each program you
wish to renumber.
è To quit the menus, press d
.
FR
NL
DE
IT
DK
NO
SU
SF
RU
ES
PT
GR
TR
HU
PL
CZ
SK
GB
О
Ж F
FI
GB
GR
I
ï
Manual Store Æ
Manual Store
$ System Europe Æ
• Search
• Program No.
• Fine Tune
• Store