Bowflex PR1000 - Manual (Page 13)

Assembly
Step 7: Upper Lat Tower
Parts
• Upper Lat Tower
• Lat Tower Cross Bar with Pulleys and Cables
Hardware
• (2) 3/8” x 3” Hex Head Bolt (#4)
• (4) 3/8” Washers (#10)
• (2) 3/8” Nut (#11)
Tools
• (2) Adjustable Wrenches (not included)
7-1 Align the Lat Tower Cross Bar bolt holes with the bolt holes in the Upper Lat Tower bracket.
7-2 Install and tighten the hardware.
Note: Do not unwrap the cables from the pulleys.
11
10
4
10
Assembly Manual
13