Philips SHAVER Series 3000 afeitadora eléctrica en seco User Manual
Page 10
Replacement
Replace the shaving heads every two years for optimal shaving results.
Replace damaged or worn shaving heads with HQ56 Philips Shaving Heads
only.
1
Switch off the shaver. Remove the mains plug from the wall socket
and pull the appliance plug out of the shaver.
2
Press the release button (1) and remove the shaving unit (2).
3
Turn the wheel anticlockwise (1) and remove the retaining frame (2).
4
Remove the shaving heads and place new ones in the shaving unit.
5
Put the retaining frame back into the shaving unit, push it down (1)
and turn the wheel clockwise (2).
6
Put the shaving unit back onto the shaver.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service
or go to your Philips dealer. You can also contact the Philips Consumer
Care Centre in your country (see the worldwide guarantee leaflet for
contact details).
The following accessories are available:
- HQ56 Philips Shaving Heads
- HQ110 Philips Shaving Head Cleaning Spray
ENGLISH
10