Bushnell 11-8321 - Manual (Page 5)

10. “Low Resolution” Mode will cause your pictures to be of a lower resolution, but allows you to store
many more pictures in the camera’s memory. The default setting is Hi resolution. To change the
resolution, press the MODE button until the “mode” icon appears. Press the SNAP button and “Lo”
will appear. The camera is changed from high resolution to low resolution. Do the same steps for
the desired resolution setting.
CAPTURED PICTURES WITH BUILT-IN MEMORY:
Pixels (resolution) Image quality Captured Picture Quantity
1600X1200(Hi) High quality (HQ) Up to 18 pictures
Low quality (LQ) Up to 25 pictures
1280X1024(Lo) High quality (HQ) Up to 24 pictures
Low quality (LQ) Up to 33 pictures
11. When in “Normal” mode press the MODE button 3 times to enter the “AVI” mode.
The icon will appear. Press the SNAP button to start AVI capturing and counting.
The resolution for AVI is 320X240 pixels. The AVI capturing can last for 40-70
seconds as the captured objects and environment will vary.
5