Belkin F1DE108C - Manual (Page 13)

11
INSTALLATION
Connecting Computers to the Switch (USB Connection)
1. Attach the IEC power cable to the power connector located on the rear of the Switch.
2. Using the OmniView ENTERPRISE Quad-Bus Series Dual-Port USB KVM Cable
(F1D9401-XX), connect the high-density, 50-pin, SCSI 2-style connector to a free
Switch port, starting with the port for the first two computers. (For best results,
screw the connectors into the Switch and the computer, when possible.)
3. Connect the USB connector of your KVM Cable to the computer. If your computer
is running Windows Me or newer, skip to step 6, otherwise continue with step 4.
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8