Philips Lisseur - Manual (Page 10)

Tip: If you lock the plates with the closing lock, the straightener heats up
more quickly.
 Comb or brush your hair so that it is disentangled and
smooth. (Fig. 3)
 Use a comb to divide the hair into sections. Do not put too much
hair in one section.
Tip: It is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.
5 Take a section that is not wider than 4cm. Place it between the
straightening plates and press the handles of the appliance firmly
together.
6 Slide the straightener down the length of the hair in 5 seconds,
from root to hair end, without stopping to prevent
overheating (Fig. 4).
7 Repeat this process after 0 seconds until you have achieved the
desired look.
8 Let your hair cool down. Do not comb or brush it before it has
cooled down, as this would ruin the hairstyle you have just created.
9 Push the on/off slide to ‘OFF’ and unplug the appliance after use.
Put the appliance on a heat-resistant surface.
cleaning
1 Make sure the appliance is switched off and unplugged.
 Let the appliance cool down completely on a heat-resistant surface.
 Clean the appliance with a damp cloth.
EnglisH 10