B&K AVP 2030 - Manual (Page 13)

Page 11
13. Surround outputs -
Outputs for your surround system. These variable level outputs are
provided with the Surround Sound Processor option for sending signal to
the power amplifiers as follows.
FRONT L - Provides an audio output signal for sending to the input
channel of the power amplifier for the front left speaker.
FRONT R - Provides an audio output signal for sending to the input
channel of the power amplifier for the front right speaker.
REAR L - Provides an audio output signal for sending to the input
channel of the power amplifier for the rear left speaker.
REAR R - Provides an audio output signal for sending to the input
channel of the power amplifier for the rear right speaker.
SUB - Provides an audio output signal for sending to the input
channel of the power amplifier for a passive subwoofer or
the input of a powered subwoofer.
CENTER - Provides an audio output signal for sending to the input
channel of the power amplifier for the center speaker.
14. SEND/RCV inputs -
Not currently used. For future applications.
15. Composite Video inputs -
Inputs labeled TV-V3, V2, V1, and DVD/VLD. Provides composite video
input to the AVP from the video source that the preamplifier can switch
between for viewing or recording the video signal.
16. Composite Video outputs -
Outputs labeled Z1/MON, Z2/MON, V2, and V1. Provides composite
video output to a TV, monitor, or VCR for viewing or recording the video
signal. Z1/MON is the video output for zone 1, V1 OUT is the output for
zone 1 VCR. Z2/MON is the video output for zone 2, V2 OUT is the
output for zone 2 VCR.