Bush Hog 1035 - Manual (Page 13)

BUSH HOG / MATERIAL HANDLING REPAIR PARTS MANUAL
1-31D-1
MAY, 2011
HYDRAULIC SYSTEM
1035 Models
REF. PART DESCRIPTION QTY.
NO. NO. REQ’D.
1 38290-17 Hose, 1/4 X 21 2
2 38290-16 Hose, 1/4 X 14 2
3 38290-12 Hose, 1/4 X 19 2
4 38290-7 Hose, 1/4 X 36 2
5 *52387 **Tube, Oil Line(Lcb) 1
6 *52388 **Tube, Oil Line(Lcr) 1
7 *52389 **Tube, Oil Line (Tcr) 1
8 *52390 **Tube, Oil Line (Tcb) 1
9 52108-1 Rubber Spacer 4
10 51968 Pad, Oil Line 4
11 51961 Clamp, Oil Line 2
12 52414 Shield, Oil Line 1
13 42848-1 Flange Nut 4
14 8137-1 Tie Strap, 3/16, Plastic 2
36409 Replacement, Oil Line Tee Fitting
36410 Replacement, Oil Line 90° Fitting
36411 Replacement, Oil Line Straight Fitting
36412 Repair, Oil Line Tube Splice Fitting
*NOTE: If a fitting or oil line is damaged, it can be repaired with replace-
ments listed rather than
replacing the complete oil line. No specific tools are required, only common
wrenches and a hacksaw.
**NOTE: Because of difficulty in shipping oil line tubes, they have been bro-
ken down into sections for shipping. The two sections of tube must be
threaded together to construct the original one piece tube which is not avail-
able for repairs.