Belkin F5D7001 - Manual (Page 14)

13 12 13 12
2.4
Confirm that the Card will fit into the slot you have chosen. Keep in
mind that the included antenna needs to be oriented with the top
pointing up. If there are cables and other connectors in the way, try
to pick the PCI slot that has the fewest obstructions to the correct
positioning of the antenna.
2.5
Remove the metal port cover from the back of the computer that
corresponds to the PCI slot you selected. If there is a screw, place
it in a safe place, as you will be using it to attach the Card to the
computer later.
2.6
Push the Card firmly into the PCI slot that you have chosen.
Apply pressure as needed until the connector is fully seated.
2.7 Now secure the Card with the screw that you previously
placed in a safe place.
2.8
Carefully screw the antenna onto the threaded connector on the
Card. Turn the antenna until it is vertical and pointing up.
2.9
Replace the computer’s cover. Now that the Card is installed, you
can reconnect the power cord, and turn it back on.
Installing and Setting Up the Card