Philips BEARDTRIMMER Series 5000 Tondeuse barbe étanche - Manual (Page 7)

- Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
- Noise level: Lc= 65dB(A)
compliance with standards
- The appliance complies with the internationally approved IEC safety
regulations and can be safely cleaned under the tap.
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
preparing for use
charging
Charge the appliance fully before you use it for the first time and after a
long period of disuse.
Charging takes about 60 minutes if the appliance is completely empty.
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance and put the adapter in the
wall socket.
, The battery light flashes orange and white alternately.
, After about 3 minutes, the battery light flashes white only. At this
point, the battery contains enough energy for one cordless trimming
session.
, The battery light continues to flash white and when the appliance is
fully charged, it lights up solid white.
, If the fully charged appliance is still connected to the mains after
1 hour, the battery light goes out after 30 minutes.
English 7