Philips HAIRCLIPPER Series 1000 Tondeuse cheveux - Manual (Page 3)

Note: Make sure the electrical contacts of the
clipping attachment are dry before you reattach the
attachment to the handle.
10 To attach the clipping attachment, put it on
the handle in such a way that the open dot
on the handle is aligned with the arrow on
the clipping attachment (1). Then turn the
clipping attachment clockwise until the arrow
is aligned with the solid dot on the handle
(2) (Fig. 14).
Replacement
If the adapter is damaged, always have it replaced
with one of the original type in order to avoid a
hazard.
Only replace a damaged or worn attachment
or comb with an original Philips replacement
attachment or comb.
Philips replacement parts (clipping attachment,
cutting element, combs, handle and adapter) are
available from your Philips dealer and authorised
Philips service centres.
If you have any difficulties obtaining replacement
parts for the appliance, contact the Philips
Consumer Care Centre in your country (you find
its phone number in the worldwide guarantee
leaflet).
Environment
Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an official collection point for
recycling. By doing this, you help to preserve
the environment (Fig. 15).
guarantee & service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If
there is no Consumer Care Centre in your country,
go to your local Philips dealer.
-
4222.002.8008.1 3/9