Bushnell Cabela 20-3131 - Manual (Page 6)

6
SCAN (LCD Indicator - “SCAN”): When the Power button is held down longer than 3 seconds, the unit
transitions to SCAN mode. This mode allows the range to be continuously updated as long as the Power
button remains depressed. The word “SCAN” will blink and appear in the left side of the LCD once this
mode is activated.
>150 (LCD Indicator - “>150”): This mode can be used to ignore energy pulses reflecting off objects
less than 150 - 165 yards / meters away. It would typically be used when distancing through brush to an
object further than 150 yards / meters away. Note: In this mode, the system will not measure to targets
less than 150 yards / meters.
To select >150 Mode, while looking through the monocular, depress and release the mode button. Note:
The CABELA’S VLR will return to the last setting used, each time the unit is turned-on.
ILLUMINATING INDICATORS
Low Battery Charge (LCD Indicator - ): When both dashes inside the battery symbol are displayed, the
battery is fully charged. When the dashes start to fade away, it means the battery charge is getting low
and the 3-volt lithium battery should be replaced.
ROLL DOWN EYECUP
The CABELA’S VLR’s monocular is equipped with a rubber eyecup designed for your comfort and to
exclude extraneous external light. If you wear sun / eyeglasses, roll down the eyecup. This will bring your
eye closer to the ocular lens, thus providing improved field of view.