Philips SHAVER Series 9000 SensoTouch Rasoir électrique 100 % étanche User Manual
Page 10
10
Quick charge
After the shaver has charged for 3 minutes, it contains enough energy for
one shave.
Charging in the charger
1
Insert the small plug into the charger.
2
Unfold the charger (‘click’).
3
Put the adapter in the wall socket.
4
Put the shaver in the charger.
, The display shows that the shaver is charging (see chapter ‘The
display’).
Charging in the Jet Clean System (RQ1296CC, RQ1295CC,
RQ1290CC, RQ1286CC, RQ1285CC, RQ1284CC, RQ1280CC,
RQ1275CC, RQ1265CC, RQ1260CC, RQ1252CC, RQ1251CC,
RQ1250CC only)
1
Put the small plug in the Jet Clean System.
2
Put the adapter in the wall socket.
3
Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
Note: The shaver cannot be placed in the Jet Clean System when the protection
cap is on the shaving unit.
Note: RQ129x only: when you turn the shaver upside down, the minutes
indication on the display is also turned upside down so you can still see to what
level the battery is charged.
ENGLISH
10