Blaupunkt RCM 148 User Manual

Page 14

Advertising
background image

34

Displaying the selected programme
type

•

Press << or >>.

The programme type selected last will be
displayed briefly.

Selecting a programme type

a) Using the preset buttons

When PTY is switched on, you can use
the preset buttons 1-6 to select the
programme types stored at the factory.

•

Press one of the presets 1-6.

The selected programme type will be
displayed for 2 seconds.

If you would like to listen to a station
with this PTY,

•

press / to start the seek tuning
function.

If the radio is unable to find a station offer-
ing the selected programme type, the dis-
play will show “NO PTY” and a beep tone
will be emitted. The radio will select the sta-
tion which was tuned into before seek tun-
ing was activated.
You can assign different programme types
to each preset position. Please refer to the
next section on “Storing programme types”.

b) Using the << >> buttons on the rocker

switch

When PTY is switched on, you can
select a programme type using buttons
<< >>.

•

Press << or >>; the programme
type selected last will be displayed
for 3 seconds.

•

During this period press >> (for-
wards) or << (backwards) to select
the desired type.

•

Press << or >> as many times as
required.

If you would like to listen to a station
with the selected PTY,

•

press / to start the seek tuning
function.

If the radio is unable to find a station offer-
ing the selected programme type, the dis-
play will show “NO PTY” and a beep tone
will be emitted. The radio will select the sta-
tion which was tuned into before seek tun-
ing was activated.

CULTURE

SCIENCE

VARIED

POP MUSIC

ROCK MUSIC

CLASSICS

Switching PTY ON/OFF

•

Press PTY.

When the function is active, the programme
type selected last will briefly appear in the
display. “PTY” will appear permanently.

Checking the programme type of the
station

•

Press PTY for approximately 2 sec-
onds.

After the beep tone the display will show the
programme type offered by the tuned in sta-
tion. If “NONE” appears in the display, the
current station has no PTY code.

FrSieLouKiStLoRCM148 gb®

29.05.2002, 12:51 Uhr

34

Advertising