Getting started 31, Setting the dialling mode (tone/pulse), Setting the date and time – Brother FAX-8350P User Manual
Page 41: Setting the station id, Initial setup, Getting started
4
C H A P T E R F O U R
Initial
Setup
31
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial
line, you can change the setting to PULSE by following the steps below.
1
For the FAX-8350P, Press
Menu
,
1
,
1
.
For the MFC-9650/FAX-8750P, Press
Menu
,
1
,
1
,
1
.
The screen prompts you to select TONE or PULSE.
DIALLING:TONE
SELECT { } & SET
DIALLING:PULSE
SELECT { } & SET
2
Use
or
to select the dialling mode.
3
Press
Set
when the screen displays the dialling mode you want.
4
Press
Stop
to exit.
Setting the Date and Time
Your machine displays the date and time, and prints it on every fax you
send.
In the event of a power failure, the machine maintains date and time
information for about 9 hours. All other settings remain unaffected.